| |
|
|
| |
The Right Material Selection
Over 100 employees produce high quality thread guides for you in
our Chinese branch under German management. The QS-Surveillance
during the production guarantees a constantly high standard
quality according to your requirements. Our own moulding centre
guarantees good valued and precise moulds with highest
flexibility and promptness.
With 6 different materials to choose from for your thread
guides, the choice appears somewhat difficult. The following
short characteristics shall be a guideline to help you choose
the best material for your applications. If in doubt, please
contact us. We will find the right material for you.
DOCERAM A-997 Alumina is of 99,7% purity. Its very small
grain size of 1,6µm results in a fine and fibre friendly
surface. In combination with a very good hardness and wear
resistance, our A-997 is the ideal material for all applications
with high speeds and tensions. A-997 is surface finishing from
satinated to mirror and high precision with narrow tolerances.
Ideal for all Chemical Fibre Applications!
Similar to our A-997, our DOCERAM A-99S is fibre
friendly, wear resistant and mechanically strong. The surface is
good, although it can not reach the excellent performance of our
A-997.
DOCERAM Slim Alumina is of a 95-97% purity. This standard
quality is of a good hardness and wear resistance. With a lower
purity than A-997, our Slim is available in several colours:
ivory, white, pink, red and salmon. Slim is fibre friendly and
can be used for all standard applications which require a good
valued, low cost product.
DOCERAM Tianit is a very fibre friendly Titania. Only
half as hard as our A-997, Tianit is less wear resistant. With
its soft surface, it will however treat your thread nice and
smoothly, e.g. decrease the frequency of filament breakage.
Tianit is the perfect material, where a fine, tender surface is
vital for the application. Widely applied in yarn texturing.
DOCERAM Spark is of a distinguished shiny black. Because
of its electrical conductivity, DOCERAM Spark is used in
applications with glass, carbon and man made fibres where it has
an antistatic effect. It is a Titania, thus very fibre friendly.
Only half as hard as our A-997, Spark is less wear resistant.
Spark is the perfect material, where a fine, tender antistatic
surface is required.
DOCERAM Electrowhite is a good standard ceramic quality
from Steatite. It usually comes with a glazed surface is cost
effective, and can be used where basic ceramical properties are
needed: Corrosion-, heat-resistance and insulation. The price is
similar to porcelain, but it is tougher, more precise and
optically nicer. |
|
| |
|
|
|
Main criteria for your correct
choices: |
|
|
|
|
| |
|
Material |
Features |
Advantages |
|
A-997 |
Top Quality, High Wear Resistance, Very
Fibre-Friendly |
|
1. |
Narrow tolerances, perfect surface |
|
2. |
If the thread guide has a big
influence on the quality of your products, do not
hesitate to decide for DOCERAM A-997 Top Quality
|
|
3. |
Ideal for high tensions, high speed,
hard and/or sensitive chemical fibre
|
|
|
A-99S |
High Quality, High Wear Resistance |
|
1. |
Narrow tolerance, good surface |
|
2. |
A-99S can replace A-997 when the
requirements regarding surface roughness are lower
|
|
3. |
Ideal for high tensions, high speed
|
|
|
Slim |
Good Standard Quality, High Wear Resistance |
|
1. |
Suitable for all standard
applications, e.g. low thread tensions and medium
fibre speed |
|
2. |
Good wear resistance
|
|
3. |
Good valued low cost material,
especially for simple geometries like collar eyelets
etc
|
|
|
Spark |
Conductivity, Very Fibre-Friendly |
|
1. |
Because of its conductivity, DOCERAM
Spark is used in applications with glass, carbon and
man made fibres where it has an antistatic effect |
|
2. |
Though the spherical grain structure
we reach a very fibre-friendly surface as well a
decrease in the frequency of thread breakage
|
|
|
Tianit |
Very Fibre-Friendly |
|
1. |
When Fibre Friendliness is the main
concern |
|
2. |
Though the spherical grain structure
we reach a very fibre friendly surface as well a
decrease in the frequency of thread breakage
|
|
|
Electrowhite |
Very Fibre-Friendly |
|
1. |
Budget priced alternative to cheap
porcelain |
|
2. |
Suitable for low wear applications
|
|
3. |
Optimal fibre friendliness at minimum
price
|
|
|
|
|
| |
|
|
|
|
Name |
A-997 |
A-99S |
Slim |
Tianit |
Spark |
Electrowhite |
|
Price |
P =
 |
|
|
P =
|
P =
|
|
|
S =
|
S =
|
S =
|
Friendliness
to the thread |
P =
|
P =
|
|
P =
|
P =
|
|
|
S =
|
S =
|
S =
|
S =
|
|
Wear resistance |
|
|
|
|
|
|
|
Antistatic Effect |
Not Existent |
Not Existent |
Not Existent |
Not Existent |
|
Not Existent |
|
Mechanical Strength |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
= Very Good |
= Good |
= OK |
= Not Ideal |
|
|
|
|
| S
= Satinated |
P
= Polished |
|
|
|
|
| |
|
|
| |
|
Application |
Importance |
Recommendation |
|
Knitting Machinery |
price |
Slim |
|
Winder Guides for PA thread |
wear resistance, thread friendliness |
A-997, satinated
A-99S, satinated |
|
Twisting Machinery |
price, wear resistance |
Slim |
Sensible Fibres at Low Speed
(silk, glass, carbon, microfibres) |
thread friendliness |
Spark, polished |
|
Sensible Fibres at High Speed |
wear resistance, thread friendliness |
A-997, polished
A-99S, polished |
|
Weaving Machinery |
price, wear resistance |
Slim |
|
Texturing Machinery |
wear resistance, thread friendliness |
A-997, polished or
satinated
A-99S, polished or satinated
Tianit, polished |
|
Spinning Machinery |
wear resistance, thread friendliness |
A-997, polished
A-99S, polished |
|
Creels |
price |
Slim
Electrowhite |
|
|
|
|
|
|
|
顶部 |
|
|
|
|
|
|
|
